Due to current tariffs affecting production cost, prices will be raised accordingly.
NOTE: This IS NOT the clock panel version and will not fit in the dash panel.
Older Demo Video here: https://www.youtube.com/watch?v=OFOATa6HGx4
Compatible Models:
- 86-90 2.5L TBI Renix Engines
- 87-90 4.0L MPFI Renix Engines
- 86-90 AW-4 Auto Transmissions
- 89-90 Bendix ABS Systems (Requires extra pin added to Diagnostic Adapter)
Have a 1986-1990 2.5L or 1987-1990 4.0L Jeep with Renix EFI and 15 pin Diagnostic Port? Old Jeepers unite, the REM is here for your diagnostic needs!
The REM is a Plug-and-Play homebrew scantool decked out with the latest tech to read in your Renix Jeeps Engine and Transmission computers’ data for a wealth of information on all the various sensors and readings throughout! A Check Engine Light has been added to alert of possible sensor issues or failures. By combining Transmission and Engine data you can even keep an eye on fuel economy! With included USB port or Micro SD card slot, data logging will be available to diagnose troublesome issues off vehicle as well.
But I couldn’t just stop there; this Open Source and Mod Friendly device is fully compatible with Arduino and includes a wealth of bonus features like a 3 Ch Fan Relay Controller, Analog Voltage and Resistance Reading, and a Signal Generator for low level piggyback engine tuning! A lot of new features and software are constantly being developed to create the ultimate car-puter device for your old Jeep!
Features:
– Now printed in ASA Carbon Fiber for higher heat resistance!
– Portable Plug-&-Play Scan Tool that can be used anywhere!
– Shows Live Engine Data and Reports basic sensor faults
– Shows Live Transmission Data and TCU Error Codes
– Check Engine Light alerts when faults are detected
– Auto-dimming RGB LCD Screen can display 4 readings at once
– Helpful diagnostic tips and Description booklet included
– Built-in 3 channel Fan Relay controller for running custom setups
– Micro SD Slot for future datalogging
– USB C port for datalogging and software updates
Upgrades:
– Bluetooth Module: Remotely monitor live data on an older android phone with XJBlueTalk App (Check if you can still download this as it is not compatible with newer Android OS security requirements)
– Bonus Mod Jack: Adds a 6-pin jack and pigtail to the REM to access additional modding capability. This gives access to a fused 5v Rail, Ground, 2x 5v analog inputs, 1x low current relay driver, and alternate DAC signal out hookup. This would be useful for interfacing with in-vehicle things like custom gauges(wideband or other), custom sensors(fuel pressure or other), or turn things on or off(Like a dash light or small relay.)
In the box:
– REM II+ Scan Tool
– REM to Renix Diagnostic Adapter
– 10′ Ethernet Cord
– Velcro
– Quick Start Manual